I-2 Operator’s Manual – OPTI CCA-TS2
INDEX
E
Error displays 7-1
Error report 7-33, 7-34
Ethernet settings 3-36
Expiration
setting up 3-21
Export
data 4-16
F
Factory settings
checking 7-19
G
Gas bottle
changing 6-7
description 1-9
installing 2-4
Gas I/O Port
replacing 6-6
Gas pressure
checking 7-15
Gas test 7-26
Gas valve
checking 7-18
Glucose (Glu)
Clinical signiîš¿cance Glu-1
Correlation to Other Methods
Glu-4
Interferences Glu-2
Linearity Glu-3
Measurement principle Glu-2
Measurement range Glu-2
Reference intervals Glu-2
Reproducibility Glu-3
SRC Limit Values Glu-2
Groups
user 3-22
H
Handle 1-7
Hardware
settings 3-30
Hematocrit 8-9
calculation A-13
reference ranges A-5
Hemoglobin oxygen saturation
8-9, A-10
calculation A-10
reference ranges A-5
Hemoglobin oxygen saturation
(SO2%) THB/SO2-1
clinical signiîš¿cance THB/SO2-1
measurement principle THB/SO2-2
measurement range THB/SO2-2
reference intervals THB/SO2-2
Hydrogen ion concentration 8-9
calculation A-8
reference ranges A-5
temperature corrected A-12
I
Input values 8-6, A-2
Installation. See Setup
Interface
RS232, test 7-22
Interferences 8-13
Ionized Calcium (Ca++)
clinical signiîš¿cance Ca-1
correlation to other methods Ca-3
interferences Ca-2
linearity Ca-3
measurement principle Ca-1
measurement range Ca-1
normalized A-13
reference intervals Ca-2
reference ranges A-5
references Ca-3
reproducibility Ca-2
unit conversion A-8
L
Lactate (B-Lac Cassette)
Clinical signiîš¿cance Lac-1
Correlation to Other Methods
Lac-4
Interferences Lac-2
Linearity Lac-4
Measurement principle Lac-1
Measurement range Lac-1
Reference intervals Lac-2
References Lac-4
Reproducibility Lac-3
SRC Limit Values Lac-2
Lactate setup 7-27
Language
selecting 3-29
Last Barcode 3-10
Last Patient Info 3-10
LEDs
checking 7-16
Limitations 8-12
Limits
calculated 3-14
critical 3-12
measurement 3-12
Lockout
New Lot 3-6
QC 3-5
SRC 3-5
M
Mains supply A-6
Maintenance 6-1
annual 6-5
daily 6-1
log C-1
quarterly 6-1
weekly 6-1
Maintenance report 7-36
Manuals 9-2
Measured Parameters 3-10
Measurement limits 3-12
Menu structure B-1
Model and serial numbers 1-6
N
New Lot Lockout 3-6
Normalized ionized calcium
reference ranges A-5
Normal ranges
setting 3-12, 3-14
O
Operating altitude A-1
Operating parameters A-2
Operating principles 8-1
Operation
analyzer 8-2
Optics test 7-21
Overvoltage category A-6
Oxygen content 8-9
calculation A-10
reference ranges A-5
Oxygen partial pressure (PO2)
clinical signiîš¿cance PO2-1
correlation to other methods PO2-3
linearity PO2-3
measurement principle PO2-1
measurement range PO2-1
precision and recovery PO2-2
To Next Page
Loading...
Need help?
General