OPTi CCA-TS2 User Manual

2-8 Operator’s Manual – OPTI CCA-TS2
2 SETUP
• Close the sample chamber cover (Fig. 2-20).
• After the cover has been closed, the
instrument will automatically detect the
presence of the calibrator cassette and begin
calibration (Fig. 2-21).
• After the calibration is complete, you will be
prompted to open the sample chamber cover
and remove the cassette (Fig. 2-22).
• Place the calibrator cassette back into its
pouch immediately after removal from the
instrument.
NOTE: Makesuretokeepthecalibrator
cassettewiththeinstrumentatalltimes.
Fig. 2-22 Remove Calibrator
Fig. 2-21 tHb Calibration
Fig. 2-20 Close Cover

OPTi CCA-TS2 Specifications

General

Brand	OPTi
Model	CCA-TS2
Category	Measuring Instruments
Language	English