Opticon
H15
User Manual
3-13
3.2.9. Dialing Properties
ICON ITEM & FUNCTION
“Dialing Properties” Tab
(Figure 3-27 to 3-30)
• In the When dialing from list, select the “Location” where you want to change
settings.
• To create a new location, select “New”. Enter the name of the location, and then
select “OK”.
• Enter or edit the area code and local country code as needed.
• In Dial using, select “Tone dialing” or “Pulse dialing”. Most phone lines are
tone.
• To automatically disable call waiting, select “Disable call waiting by dialing”,
select the appropriate number sequence in the list, or enter a new sequence.
Editing dialing patterns
• Using the codes listed in the topic; revise the dialing patterns as needed
NOTES:
• If you need to use character other than the ones listed here, use manual dialing.
• Hyphens and spaces in dialing strings are ignored.
• Some modems may not respond to the following characters, even though your
device lets you add them to the dial string
To Next Page
Loading...