Installing and Operating the Tablet and Base Station E-Series 3-27
The IDN Port is functionally identical to those on all current MICROS
workstations including the Base Station R-Series, Workstation 5A, Workstation
2015, and KW270.
10101 COM5
COM5 is a full featured modular RS232 Interface. Use RJ45 to RS232 DB9
Adapter Cable, PN 300319-102.
Cash Drawer #1 - Cash Drawer #2
The Base Station E-Series cash drawer connectors are based on the 8-pin Mini-
DIN connectors. Two of the additional pins are used to establish a serial interface
between the Base Station and a future APG Smart Cash Drawer.
To support existing MICROS cash drawers with the 4-Pin DIN connector, use
adapter cable PN 300290-020.
USB5 (12V)
USB5 is a MICROS custom powered USB port that supplies 12V, 5V, and USB
data, to the Protégé Customer Display System.
Customer Display
The Base Station E-Series customer display port supports one integrated or pole
mount customer facing display. To connect two customer displays, use Y cable
PN 300107-030.
To Next Page
Loading...