OPTIMOD SURROUND PROCESSOR INSTALLATION
2-71
f) Set “Maximum speed (bps)” to
“115200.”
g) Check “Enable hardware flow con-
trol.”
h) Make sure that all other boxes are
not checked.
i) Click “OK.”
j) Select the Networking tab.
k) Make sure that “PPP: Windows 95/
98/ NT 4/ 2000, Internet” appears in
the “Type of dial-up server I am
calling” field.
l) Make sure that “Internet Protocol
(TCP/IP) is checked.
You may leave “File and Printer
Sharing for Microsoft Networks”
and “Client for Microsoft Net-
works” checked if you like.
m)Click “OK.”
n)
When the “Connection properties”
window appears, click “OK.”
To Next Page
