Orban OPTIMOD 8685 User Manual

OPTIMOD SURROUND PROCESSOR OPERATION
3-67
controls. All other menu tabs contain Full or Advanced Modify controls for a
given processing channel.
You can reset any Basic Modify Control without losing LESS-MORE func-
tionality; Full and Advanced modify control adjustments will cause L
ESS-
M
ORE to be grayed-out.
To set a control, click it (it will become highlighted) and then adjust it by
dragging it with the mouse or moving the wheel on the mouse.
You can also use the + and – keys on the numeric keypad to adjust any
control.
To recall a preset:
Presets, whether Factory or User, contain settings for both the surround and 2.0
processing. Recalling a preset overwrites both the surround and 2.0 controls.
If you wish instead to recall only the 2.0 settings in a given preset while leaving
the surround processing unchanged, you must Import the 2.0 section of a Factory
or User preset into the currently active preset (see To import a preset into the 2.0
processing below).
A) Choose R
ECALL PRESET from the FILE menu to bring up the OPEN PRESET FILE
dialog box. You can also click the leftmost button on the button bar.
B) Click the desired preset within the dialog box to select it.
C) Double-click the desired preset or select it and click the R
ECALL PRESET button
to put it on-air.
Continually clicking the RECALL PRESET button will toggle between the
current and previous on-air presets.
D) Click DONE to dismiss the OPEN PRESET FILE dialog box.
The folder on your hard drive containing the preset files (both Factory
and User) is automatically synchronized to the contents of its associated
8685’s non-volatile memory each time 8685 PC Remote connects to that
8685. The 8685’s memory is the “master.” This means that if you delete a
user preset from the 8685’s memory (whether locally via its front panel or
via 8685 PC Remote), 8685 PC Remote will automatically erase this preset
from this folder on your computer. To archive a preset permanently, you
must use the Backup function (see page 3- 68).
To import a preset into the 2.0 processing:
This procedure allows you to recall only the preset settings that affect the 2.0
processing. The surround processing does not change.
A) Choose I
MPORT 2.0 PRESET from the FILE menu to bring up the IMPORT 2.0
PRESET FILE dialog box.
B) Click the desired preset within the dialog box to select it.

Orban OPTIMOD 8685 Specifications

General

Brand	Orban
Model	OPTIMOD 8685
Category	Computer Hardware
Language	English