3-26
OPERATION ORBAN MODEL 8685
B) With the mouse, highlight the desired 2.0 source preset, either Factory or
User.
C) Click I
MPORT.
After importing the 2.0 parameters, you are still free to adjust any individual Sur-
round or 2.0 parameter. When you are satisfied with your work, you can then save
this combination of Surround and 2.0 parameters as a new User Preset. You can then
use your new User Preset as a source for 2.0 parameters to be imported into any
other User Presets you may wish to create or edit. For example, you could have six
User Presets with identical 2.0 processing parameters but with different Surround
processing parameters. The 2.0 bulk import feature makes this easy.
If you have not edited any parameters in a given 2.0 Factory Preset’s dynamics proc-
essing, L
ESS-MORE will continue to be available even if that 2.0 preset has been im-
ported into a User Preset and you are editing that User Preset. Moreover, you can
freely create multiple generations of User Presets that retain 2.0 L
ESS-MORE func-
tionality. The only thing that counts is that the 2.0 parameters in a given User Preset
are unchanged compared the original source Factory Preset.
Sound-for-Picture Presets
Sound-for-picture preset names all begin with “TV” or “TVA.” Most of these presets
have the CBS Loudness Controller turned on. It is set so that loudness is constrained
to a level consistent with the active D
IALNORM value (see Loudness Control on page
3-14). If you wish to use a given preset with the loudness controller turned off, set
its L
OUDNESS THRESH parameter to OFF and save the result as a User Preset.
To Next Page
Loading...
Need help?
General
