2-40
INSTALLATION ORBAN MODEL 8685
tion (like a user’s interacting with the front panel or with the PC Remote
application).
c) LOCATE to the Event Type field and set the desired event. You can recall any
factory processing preset, user processing preset, and Setup. You can
activate B
YPASS mode (for scheduled transmission network testing), TONE,
and E
XIT TEST, which returns you to the processing preset that was active
before you invoked T
ONE or BYPASS.
Although two Setups might only differ by one parameter (for example,
different values of S
URROUND DIALNORM), recalling Setups also provides an
easy way to automate complicated changes involving many parameters
like input/output routing.
D) For SET BY DATE, set the desired date and time for the event and specify the
Event Type.
E) Choose D
ONE and press ENTER.
You will return to the automation event list. You may have to scroll the
list (using the knob) to see the event that you just added.
5. To edit an existing event:
A) Using the knob, highlight the event you wish to edit.
B) Select the E
DIT button and press ENTER. The edit screen appears.
C) Edit the event as desired.
D) When you have finished making edits, choose D
ONE and press ENTER.
6. To delete an event:
A) Highlight the event to delete with the knob.
B) Choose D
ELETE and press ENTER.
7. Choose D
ONE and press Enter to leave the Automation screen.
Security and Passcode Programming
You can use multi-level passcodes to control access to the 8685 via the front panel
and via PC Remote. You can configure a given passcode to allow one of the follow-
ing levels of access:
1. All Access (i.e., administrator level)
2. All Access except Security
3. All screens except Modify and Security
4. Recall, Modify, and Automation
5. Recall Presets and program Automation
To Next Page
Loading...
Need help?
General
