Orolia WR-Z16 - Specific Snmpv3 Configuration

Alternatively, the groups definition can be modified to create and add communities. For
that purpose, the information from the mapping section in /usr/share/snmp/snmpd.conf
can be used as a reference to modify the /etc/snmp/snmpd.conf file.
7.2.1.3 Specific SNMPv3 configuration
By default, there are four created users in the device:
snmpv3 User Auth Protocol Priv Protoco
Auth Password
(default)
Priv Password
(default)
userSNMP MD5 DES userSNMPpass userSNMPpass
adminSNMP MD5 DES adminSNMPpass adminSNMPpass
secuserSNMP SHA AES secuserSNMPpass secuserSNMPpass
secadminSNMP SHA AES secadminSNMPpass secadminSNMPpass
Note: SNMP v3 user parameters: Only access_view and access_mode para-
meters can be directly changed. Encryption protocols are changed through
change_password.
Note: SNMP v3 users: UserSNMP and adminSNMP are included for retro-
compatibility purposes. It is recommended to use users relying on SHA and
AES encryption.
In the case of SNMP v3 the default passwords can be modified using the parameters under
the change password sub-tree:
OID Name Value Type Description
13.3800.0 User name <String> (i.e., userSNMP) Name of the
SNMPv3 user.
13.3800.1 Auth
<Enum>
• MD5
• SHA
Authentication
encryption pro-
tocol.
13.3800.2 Priv
<Enum>
• DES
• AES
Privacy encryp-
tion protocol.
104
CHAPTER 7 • WR-Z16 User Manual Rev. v3.4
7.2 SNMP