Orolia WR-Z16 - Healthing; Information;Overview

7.4 Healthing
The healthing module provides general information about the system health for mon-
itoring purposes. This includes information about the fans, power supplies, memories, or
temperature between others.
7.4.1 Information/Overview
The associated parameters can be accessed through the Healthing tab in the web GUI or
the command line:
Alternatively, the LLDP can be configured using the following parameters:
OID Name Value Type Description
2.1001.10 Uptime <Time> (DD:HH:MM:SS) Up time since the
last reboot our
power cycle.
2.1001.11 Local time <Date and Time> (YYYY-MM-DD HH:MM:SS
(UTC))
System date and
hour in UTC
format.
2.1001.20 RAM total <Integer> (i.e., 511348) Total available
RAM.
2.1001.21 RAM free <Integer> (i.e., 93884) Remaining free
RAM.
2.1001.31 CPUs <Integer> (i.e., 2) Total available
CPUs.
2.1001.31 CPU load 1 <Decimal> (i.e., 0.054199) Average CPU load
during the last
minute.
2.1001.32 CPU load 5 <Decimal> (i.e., 0.054199) Average CPU load
during the last 5
minutes.
2.1001.33 CPU load 15 <Decimal> (i.e., 0.054199) Average CPU load
during the last 15
minutes.
2.1001.34 CPU usage <Decimal> (i.e., 0.054199) Average CPU
usage percentage
in all cores.
2.1001.40 HDD1 size <Integer> (i.e., 1046516 kB) BOOT partition
hard disk memory
size.
2.1001.41 HDD1 free <Integer> (i.e., 966132 kB) BOOT partition
free hard disk
memory size.
114
CHAPTER 7 • WR-Z16 User Manual Rev. v3.4
7.4 Healthing