3.2.5 Connecting on Windows
3.2.5.1 Logging from UART
The connection to the UART in the WR-Z16 Model can be made by using Putty, the SSH
and Telnet client for Windows, as it supports serial connections too.
When having connected the RJ45-RS232-USB cable to the Windows PC, a new serial
port identified by COM<number> at the Device Manager, as can be checked in the figure
below.
Figure 3-1: Device manager. New serial port detected.
Afterwards, the connection can be made through Putty. The connection type should be
marked as Serial at <1>.The serial port name COM<number> should be placed at <2>, and
the port speed (115200 Bd) at <3> (see below).
24
CHAPTER 3 • WR-Z16 User Manual Rev. v3.4
3.2 Connecting to the Device
To Next Page
Loading...