Orolia WR-Z16 - Basic Trap Receptor NMS Configuration; Trap Configuration

Note: Tracked parameters: A selection of parameters in the devices have
been performed and flagged like tracked parameters. These parameters
create an alert each time that their value is changed.
7.2.2.3 Trap configuration
The SNMP traps generated by the device can be configured using the traps sub-tree
under snmp.
OID Name Value Type Description
13.3900.1 Community name <String> (i.e., public) Name of the com-
munity.
13.3900.2-
5
NMS IP 1-4
<IP address> (i.e., 192.168.1.5 or
192.168.1.0/24)
Authentication
encryption pro-
tocolDestination
NMS IP address.
13.3900.6 Start/shutdown
<Enum>
• Enabled
• Disabled
Enable/disable star-
tup and shutdown
traps.
13.3900.7 Modules
Start/Close
<Enum>
• Enabled
• Disabled
Enable/disable
module launch or
close traps.
13.3900.8 Prms tracked
<Enum>
• Enabled
• Disabled
Enable/disable
tracked parameters
traps.
13.3900.9 Prms alert
<Enum>
• Enabled
• Disabled
Enable/disable
traps when a para-
meter is in an alert
status or back to a
normal status.
Note: Default traps configuration: By default, all traps are enabled using the
public SNMPv2 community for informative purposes.
7.2.2.4 Basic trap receptor NMS configuration
Install snmptrapd in the server receiving the SNMP traps:
sudo apt-get install snmptrapd
108
CHAPTER 7 • WR-Z16 User Manual Rev. v3.4
7.2 SNMP