Orolia WR-Z16 - CLI Configuration

Note:
DNS Resolution: The last tab of network configuration entitled DNS can be
used to add a custom DNS server needed to resolve IP address. This is use-
ful in case an URL is used instead of an IP when configuring the server for a
device (e.g., NTP, Auth, etc.).
4.3 CLI Configuration
If the user prefers to configure the device from the command line, execute the wrz_con-
fig command.
The wrz_config tool provides an interactive menu directly from the command line with a
structure similar to the web GUI. The main menus are the following:
Timing: All timing-related configuration of the device (see "Timing" on page43 for
more information).
Network: Network configuration of the management & timings interfaces ("Net-
work configuration from CLI" on the facing page).
Healthing: Power Supplies & Fans related configuration ("Healthing " on page114).
Security: Configuration related to the security of the device ("Security & Authentic-
ation" on page83).
Management: Logging & Monitoring ("Monitoring & Logging" on page95) con-
figuration and aspects related to the maintenance of the device ("Device Main-
tenance" on page119).
36
CHAPTER 4 • WR-Z16 User Manual Rev. v3.4
4.3 CLI Configuration