The healthing, fans and power supply configuration parameters can be found in the fol-
lowing table:
OID Name Value Type Description
2.1000.0 Screen saver <Integer> (i.e., 1) Not used in WR-
Z16 device.
2.1000.1 Screen saver
delay
<Integer> (i.e., 60) Not used in WR-
Z16 device.
2.1000.2 Screen contrast <Integer> (i.e., 255) Not used in WR-
Z16 device.
2.1000.3 Temp target <Integer> (i.e., 60 ºC) Target tem-
perature for the
fans PWM con-
troller
0.9110.7 PWSL disable
alert
<Enum>
- No
- Yes
Disable left power
supply alerts.
0.9120.7 PWSR power
OUT
<Enum>
- No
- Yes
Disable right
power supply
alerts.
0.9210.5 Fan 0 disable alert <Enum>
- No
- Yes
Disable fan 0
alerts.
0.9220.5 Fan 1 disable alert <Enum>
- No
- Yes
Disable fan 1 alerts.
7.5 External monitoring tool
For this new architecture firmware version, an external Grafana monitoring application has
been developed in order to provide the user a deep knowledge of the configuration and
features of complete topologies with WR devices. This application is available for cus-
tomers with premium support subscriptions. If you interested in this tool for your applic-
ation, contact TimingSupport@orolia.com for more information.
7.5 External monitoring tool
CHAPTER 7 • WR-Z16 User Manual Rev. v3.4
117
To Next Page
Loading...