8.1.4.1 Map a feature to a device
The user must first navigate to the tab Devices > Devices.
Figure 8-2: Devices Management in License Portal.
Then, click on the corresponding device to map the new feature. If this device does
not appear in the list, first create it (See the following section, Create a New Device).
Once inside the corresponding device, click on Action > Map Entitlements to per-
form the association.
This panel (Figure 8:3) allows to map any purchased licenses to this specific device.
The user only needs to specify the quantity of a given feature license to associate to
the device and save it.
Mapping Purchased Licenses to Device.
At this point the license(s) is(are) associated but still not generated yet. By clicking
on the Action > Download Capability Response a license file (.bin) will be auto-
matically generated and downloaded. After refreshing the screen, the cor-
responding Status should be updated to License generated.
8.1 Licenses
CHAPTER 8 • WR-Z16 User Manual Rev. v3.4
123
To Next Page
Loading...