Figure 8-3: Licenses Configuration Panel
Then under Local Activation the user should Browse to the downloaded license file,
Upload it to device and finally Save & Apply the changes
Once the operation is done, the user can review if the license has been properly activated
(Green) by returning to the Management > Licenses > Overview screen.
8.1.4.4 Remove local license from device
In case a local license needs to be used in another device the user should first remote it
from the previous device before associating it to the new one.
Access Seven Solutions Flexera Portal.
Go to the “previous" device.
Click on Action > Remove Licenses.
Select the quantity of the corresponding license to remove and Click Save.
Review that the Status of the licenses to remove is Waiting for confirmation.
Then click on Action > Download Capability Response.
Upload previously downloaded file as described in the previous section, "Load local
license file in the device" on the previous page
8.1 Licenses
CHAPTER 8 • WR-Z16 User Manual Rev. v3.4
125
To Next Page
Loading...