OID Name Value Type Description
20.xx11.0 ID <String> (i.e., 64:fb:81:20:80:06) Unique identifier
of the peer
device (a.k.a
Chassis ID): On
WRZ-OS the
MAC address of
eth0 is used to
ensure unique-
ness
20.xx11.2 System Name <String> (i.e., be-dist32-090) Name of the sys-
tem running on
the peer device.
By default, the
hostname of the
device is used.
20.xx11.3 System Descrip-
tion
<String> (i.e., WRZ-OS v3.2.1 for WR-ZEN TP-
32BNC)
Description of
the system run-
ning on the peer
device
20.xx11.10 Firmware Version <String> (i.e., v3.2.1-RC5) Firmware ver-
sion of the cor-
responding
WRZ-OS (only)
peer.
20.xx11.11 Hardware Version <String> (i.e., WR_ZEN-v3.1) Hardware ver-
sion of the cor-
responding
WRZ-OS (only)
peer.
20.xx12.x net/wrX/peer/1/dev/timing Information
about the tim-
ing con-
figuration of
the neighbor
20.xx12.1 Status <String> (i.e., Ok) General status of
the peer device.
20.xx12.2 VCS Code <Integer> (i.e., 20001) Virtual clock use
case code.
20.xx12.3 Message <String> (i.e., Locked (TRACK_PHASE)) Extra information
for the vcs_code
(Locked state,
warning con-
dition, etc).
20.xx12.4 Active Reference <String> (i.e., BC: WR @ wr1) Massage that con-
tains the Active
reference.
To Next Page
Loading...