Figure 5-7: Custom Preset with CLI tool
Then each port can be configured independently with:
Protocol: WR, PTP, Disabled
Role: Master, Slave, Auto , Survey
Source Rank: [0-255], Order the timing source given the source rank pri-
orities where:
1 is the first source to be executed and 255 the last one.
If the source rank is set to 0, the port will not be included as a timing
source.
This parameter is not used when the port role is Master.
Figure 5-8: Port configuration (e.g., wr0) from CLI tool
54
CHAPTER 5 • WR-Z16 User Manual Rev. v3.4
5.2 General Timing Management
To Next Page
Loading...