no default value but must fit with a specific range. Strikethrough settings are ignored by
the profile and can be leaved empty or with previous value.
Telecom ITU-T 8275.1
The objective of this profile is to distribute accurate time over a full timing support network
with sync-e capability.
OID Name Default Value
Range
Note
Min Max
19.xx13.x net/<iface>/1/cfg
19.xx13.9 Transport Protocol Layer 2 (IEEE802.3) VLAN tags not allowed
19.xx13.10 Delay Mechanism E2E
19.xx13.14 Domain 24 23 48
19.xx13.11 Transport Mode Multicast
19.xx13.20 Announce Rate 8
19.xx13.21 Sync Rate 16
19.xx13.22 Delay Req Rate 16
19.xx13.24 PTP Timescale PTP
19.xx13.56 Sync-E Enabled
Telecom ITU-T 8265.1
The objective of this profile is to distribute frequency within 16 ppb over a network with
some non-aware PTP nodes.
OID Name Default Value
Range
Note
Min Max
19.xx13.x net/<iface>/1/cfg
19.xx13.9 Transport Protocol IPv4/UDP
19.xx13.10 Delay Mechanism E2E
19.xx13.14 Domain - 4 23
19.xx13.11 Transport Mode Unicast
19.xx13.12 Unicast Negotiation True
19.xx13.13 Unicast Destination <IP>
19.xx13.20 Announce Rate 1/2 1/16 8
19.xx13.21 Sync Rate - 1/16 128
68
CHAPTER 5 • WR-Z16 User Manual Rev. v3.4
5.4 IEEE 1588-2008 (PTPv2)