root@zen- 305:~# gpa_ ctrl - s security auth/tacacs/server1_ ip
172.17.5.39
root@zen-305:~# gpa_ctrl -s security auth/tacacs/server1_secret sev-
ensecret
And reboot to apply the changes.
Then the client can be accessed by using the configured user and password. In order to get
debug messages from TACACS+, the service can be launched with the command tac_
plus-g, always indicating the configuration file. For example, in the screenshots of figure a
successful access with the TACACS+ password the first time, failed the second time and
succeeded the third. Below you can see the verbose tac_plus output.
Figure 6-5: SSH connection with the WR-Z16 board
88
CHAPTER 6 • WR-Z16 User Manual Rev. v3.4
6.3 TACACS+
To Next Page
Loading...