5. OUTPUT FORMAT
REF : M18-SM-001 Rev 02
Page 34/68 Copyright© Orphée SA. All Rights Reserved. MYTHIC 18
5.2.2.3.1 Results
MYTHIC X ;Y ;RESULT [CR]
DATE;dd/mm/yyyy [CR]
TIME;hh:mm:ss [CR]
MODE;CALIBRATION [CR]
UNIT ; Unit [CR]
SEQ;Number of sequence; 0 [CR]
TEST;LMG [CR]
OPERATOR ; login Mythic when analysis is performed [CR]
WBC; Numerical Value; A;B;;;; [CR]
RBC; Numerical Value; A;B;;;; [CR]
HGB; Numerical Value; A;B;;;; [CR]
HCT; Numerical Value; A;B;;;; [CR]
PLT; Numerical Value; A;B;;;; [CR]
END_RESULT; Checksum value [CR]
A and B like routine results.
5.2.2.4 QC
5.2.2.4.1 Results
MYTHIC X ;Y ;RESULT [CR]
DATE;dd/mm/yyyy [CR]
TIME;hh:mm:ss [CR]
MODE;QC [CR]
UNIT ; Unit [CR]
SEQ;Number of sequence; 0 [CR]
LOT, Number of lot [CR] (Maximum 10 characters)
LOT DATE; Creation Dateof the lot ; time of creation [CR]
EXPIRY DATE; Expiry date [CR]
USER; User (login) who created the lot [CR]
TEST;LMG [CR]
OPERATOR ; login Mythic when analysis is performed [CR]
WBC; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
RBC; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
HGB; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
HCT; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
MCV; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
MCH; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
MCHC; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
RDW; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
PLT; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
MPV; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
THT; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
PDW; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
LYM%; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
MON%; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
GRA%; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
LYM; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
MON; Value;A;B; Target - tolerance;;; Target + tolerance [CR]