Orphee MYTHIC 18 - SOFTWARE OPERATION; Technician Display Access and Functions; Technician Password Security

To Next Page

To Previous Page

REF : M18-SM-001 Rev 02

7. SOTWARE

7. SOFTWARE

7.1 INTRODUCTION

Please refer to the User’s Manuel for explanation of the software operation.

7.2 SPECIFIC TECHNICIAN DISPLAY

The following section describe the software operation which are only accessible with the technician and

super technician passwords.

7.2.1 Technician password

The unmodified technician password is : 8SUP.

- It is strictly forbidden to disclose the technician password to the final customer.

- In such case, Orphée guarantee will not be valid.

7.2.2 Technician display

The technician display are accessible from MAIN SCREEN then SERVICE then TECHNICIAN.

7.2.2.1 Technician

allows access to the adjustment of the

counting parameters and lysis quantity. These adjustments are possible with

the super technician code only.

- For an access to the latex adjustment and HGB blanc adjustment press

allows to test the aperture current.

see section 8.3.

allows to fill up the log accessible from the

MAIN MENU.

Other manuals for Orphee MYTHIC 18