Orphee MYTHIC 18 - Repeatability; Results; Checksum

REF : M18-SM-001 Rev 02
5. OUTPUT FORMAT
MYTHIC 18 Copyright© Orphée SA. All Rights Reserved. Page 35/68
GRA; Value;A;B; Target - tolerance;;; Target + tolerance [CR]
END_RESULT; Cheksum value [CR]
A and B like routine results.
5.2.2.5 REPEATABILITY
5.2.2.5.1 Results
MYTHIC X ;Y ;RESULT [CR]
DATE;dd/mm/yyyy [CR]
TIME;hh:mm:ss [CR]
MODE;REPEATABILITY [CR]
UNIT ; Unit [CR]
SEQ;Number of sequence; 0 [CR]
TEST;LMG [CR]
OPERATOR ; login Mythic when analysis is performed [CR]
WBC; Value;A;B;;;; [CR]
RBC; Value; A;B;;;; [CR]
HGB; Value; A;B;;;; [CR]
HCT; Value; A;B;;;; [CR]
MCV; Value; A;B;;;; [CR]
MCH; Value; A;B;;;; [CR]
MCHC; Value; A;B;;;; [CR]
RDW; Value; A;B;;;; [CR]
PLT; Value; A;B;;;; [CR]
MPV; Value; A;B;;;; [CR]
THT; Value; A;B;;;; [CR]
PDW; Value; A;B;;;; [CR]
LYM%; Value; A;B;;;; [CR]
MON%; Value; A;B;;;; [CR]
GRA%; Value; A;B;;;; [CR]
LYM; Value; A;B;;;; [CR]
MON; Value; A;B;;;; [CR]
GRA; Value; A;B;;;; [CR]
END_RESULT; Checksum value [CR]
A and B like routine results.
5.2.3 CHECKSUM
For the frames with a few number of lines, the block is finished with an end line with a checksum. This sum is
calculated from the beginning of the headline to the end of the line finishing the block.
The algorithm of the calculation for the sum is :
CRC = 0xFFFF
For each byte
Work on high neeble:
Indix = byte XOR CRC
Indix = Indix AND 000F
CRC = Table(Indix) XOR (CRC divided by 16)
Work on low neeble: