To Next Page
J
joshuajonesSep 9, 2025
What to do if Orphee Measuring Instruments displays 'CYCLE: DOOR OPENED'?
- MMelinda LangSep 9, 2025
If the Orphee Measuring Instruments displays 'CYCLE: DOOR OPENED', close the door.
What to do if Orphee Measuring Instruments displays 'CYCLE: DOOR OPENED'?
If the Orphee Measuring Instruments displays 'CYCLE: DOOR OPENED', close the door.
What to do if Orphee MYTHIC 18 shows 'No results' and there is no HGB?
If the Orphee Measuring Instruments displays 'No results' and there is no HGB, check the bath wires, the lysis level, and ensure the right lysis tubing is correctly connected to the WBC bath.
What to do if Orphee MYTHIC 18 shows 'No results' because there is no HCT & PLT?
If the Orphee Measuring Instruments displays 'No results' because there is no HCT & PLT, check the bath wires. If the issue persists, perform a Cleaning Cycle, and if still unsuccessful, follow with a Bleach cycle.
Why is diluent leaking around the needle during the run cycle of Orphee Measuring Instruments?
If the Orphee Measuring Instruments displays 'Diluent leaks around the needle during the run cycle', check the rinsing needle block for clots and clean it if necessary (see section 9.3.2).
What to do if Orphee MYTHIC 18 displays 'INIT PRINTER'?
If the Orphee Measuring Instruments displays 'INIT PRINTER', switch on the printer or invalidate the printings.
What to do if Orphee Measuring Instruments displays 'THE CLEANER USED IS OUT OF DATE'?
If the Orphee Measuring Instruments displays 'THE CLEANER USED IS OUT OF DATE', replace the bottle and perform a prime Cleaner.
What to do if Orphee MYTHIC 18 displays 'HARDWARE: SYSTEM ERROR'?
If the Orphee Measuring Instruments displays 'HARDWARE: SYSTEM ERROR', restart the Mythic.
What to do if Orphee Measuring Instruments displays 'START UP CYCLE FAILED'?
If the Orphee Measuring Instruments displays 'START UP CYCLE FAILED', perform a new start up cycle.
What to do if Orphee MYTHIC 18 displays 'BACKUP : FOLDER NOT FOUND'?
If the Orphee Measuring Instruments displays 'BACKUP : FOLDER NOT FOUND', restart the Mythic.
What does it mean if Orphee Measuring Instruments displays 'BACKUP : MEMORY IS ALMOST FULL. PLEASE DELETE RESULTS'?
If the Orphee Measuring Instruments displays 'BACKUP : MEMORY IS ALMOST FULL. PLEASE DELETE RESULTS', delete results.
Key safety warnings including reading manual, operator training, and handling metal edges.
Emphasizes reading the user's manual before installation or maintenance.
Lists the three main boards and provides critical ESD handling instructions.
Mandatory safety measures, including wearing gloves and using disinfectant.
Emphasizes safety measures and the emergency stop procedure.
Table addressing issues with WBC, RBC, and HGB results and their solutions.
General| Brand | Orphee |
|---|---|
| Model | MYTHIC 18 |
| Category | Measuring Instruments |
| Language | English |