What to do if Orphee Measuring Instruments shows bad stability and what should I check?
If the Orphee Measuring Instruments shows bad stability, check if there are any bubbles in the lysis tubing. Also, check the level bubble flow in the WBC bath during the run cycle and the lysis quantity (see section 7.2.2.2).
What does it mean if Orphee MYTHIC 18 shows 'CYCLE STOPPED BY USER'?
If the Orphee Measuring Instruments shows 'CYCLE STOPPED BY USER', it indicates an emergency stop. Perform a control cycle.
What does it mean if Orphee Measuring Instruments displays 'BACKUP : MEMORY IS ALMOST FULL. PLEASE DELETE RESULTS'?
If the Orphee Measuring Instruments displays 'BACKUP : MEMORY IS ALMOST FULL. PLEASE DELETE RESULTS', delete results.
What to do if Orphee Measuring Instruments displays 'CYCLE : EMERGENCY STOP'?
If the Orphee Measuring Instruments displays 'CYCLE : EMERGENCY STOP', perform a control cycle.
What to do if Orphee Measuring Instruments displays 'BACKUP : NO MEMORY AVAILABLE FOR STORAGE'?
If the Orphee Measuring Instruments displays 'BACKUP : NO MEMORY AVAILABLE FOR STORAGE', delete the stored results.
What to do if Orphee MYTHIC 18 Measuring Instruments shows 'No results' but HGB is OK?
If the Orphee Measuring Instruments displays 'No results' and the HGB is OK, check the bath wires. If the issue persists, perform a Cleaning Cycle, and if still unsuccessful, follow with a Bleach cycle.
What to do if Orphee MYTHIC 18 displays 'CLEAN NOT DONE'?
If the Orphee Measuring Instruments displays 'CLEAN NOT DONE', perform a rinse cycle.
What to do if Orphee Measuring Instruments displays 'CYCLE : BUSY'?
If the Orphee Measuring Instruments displays 'CYCLE : BUSY', wait before performing a cycle.
What to do if Orphee MYTHIC 18 displays 'INTERN: MEMORY CORRUPTED'?
If the Orphee Measuring Instruments displays 'INTERN: MEMORY CORRUPTED', restart the Mythic.
What to do if Orphee Measuring Instruments displays 'INTERN: NO MEMORY AVAILABLE'?
If the Orphee Measuring Instruments displays 'INTERN: NO MEMORY AVAILABLE', restart the Mythic.
Key safety warnings including reading manual, operator training, and handling metal edges.
Emphasizes reading the user's manual before installation or maintenance.
Lists the three main boards and provides critical ESD handling instructions.
Mandatory safety measures, including wearing gloves and using disinfectant.
Emphasizes safety measures and the emergency stop procedure.
Table addressing issues with WBC, RBC, and HGB results and their solutions.
General| Brand | Orphee |
|---|---|
| Model | MYTHIC 18 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
