What to do if Orphee Measuring Instruments displays 'BACKUP : NO MEMORY AVAILABLE FOR STORAGE'?
If the Orphee Measuring Instruments displays 'BACKUP : NO MEMORY AVAILABLE FOR STORAGE', delete the stored results.
What to do if Orphee Measuring Instruments displays 'CYCLE: DOOR OPENED'?
If the Orphee Measuring Instruments displays 'CYCLE: DOOR OPENED', close the door.
What does it mean if Orphee Measuring Instruments displays 'BACKUP : MEMORY IS ALMOST FULL. PLEASE DELETE RESULTS'?
If the Orphee Measuring Instruments displays 'BACKUP : MEMORY IS ALMOST FULL. PLEASE DELETE RESULTS', delete results.
Why is Orphee Measuring Instruments not printing?
If the Orphee Measuring Instruments displays 'No printing', check the paper and the electrical connection.
What to do if Orphee MYTHIC 18 Measuring Instruments displays 'INTERN: RESULT AREA IS LOCKED'?
If the Orphee Measuring Instruments displays 'INTERN: RESULT AREA IS LOCKED', wait before performing a cycle. If the issue persists, restart the Mythic.
What to do if Orphee Measuring Instruments displays 'THE CLEANER USED IS OUT OF DATE'?
If the Orphee Measuring Instruments displays 'THE CLEANER USED IS OUT OF DATE', replace the bottle and perform a prime Cleaner.
Why is diluent leaking around the needle during the run cycle of Orphee Measuring Instruments?
If the Orphee Measuring Instruments displays 'Diluent leaks around the needle during the run cycle', check the rinsing needle block for clots and clean it if necessary (see section 9.3.2).
How to troubleshoot Orphee Measuring Instruments when it's not starting?
If the Orphee Measuring Instruments is not starting, check the power supply connection wires.
What to do if all results from Orphee MYTHIC 18 Measuring Instruments are bad?
If all results from the Orphee Measuring Instruments are bad, check the diluent level and ensure that the tubing is not pinched.
What to do if Orphee MYTHIC 18 shows 'No results' because there is no HCT & PLT?
If the Orphee Measuring Instruments displays 'No results' because there is no HCT & PLT, check the bath wires. If the issue persists, perform a Cleaning Cycle, and if still unsuccessful, follow with a Bleach cycle.
Key safety warnings including reading manual, operator training, and handling metal edges.
Emphasizes reading the user's manual before installation or maintenance.
Lists the three main boards and provides critical ESD handling instructions.
Mandatory safety measures, including wearing gloves and using disinfectant.
Emphasizes safety measures and the emergency stop procedure.
Table addressing issues with WBC, RBC, and HGB results and their solutions.
General| Brand | Orphee |
|---|---|
| Model | MYTHIC 18 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
