54
Oxford Technical Solutions
Selecting the operating language
The NAVconfig software can operate in several languages. To change the language,
select a language from the menu at the bottom of the page. The language can be changed
at any time without affecting the current configuration.
NAVconfig uses the regional settings of the computer to choose whether numbers are
represented in the English or European format (dot or comma for the decimal separator).
The selected language does not change the format used for numbers.
Navigating through NAVconfig
To make the process of creating a configuration easier, NAVconfig allows you navigate
to different sections by simply clicking the section name in the left-hand sidebar. You
can also move forwards and backwards though the different sections using the Back and
Next buttons.
Measurements are always displayed in metric units in NAVconfig. However, when
entering measurements alternate units can be used as long as they are specified, e.g. 10″
or 10 in. NAVconfig will then convert and display these in metric units.
Product selection
NAVconfig is a universal tool that is used to configure many different devices, so the
first step in most configurations is to choose the product that will be configured, as shown
in Figure 16.
To Next Page
Loading...
