67
To adjust the settings, click the default value in the Setting column to activate the cell. A
description on each option and how to adjust it is found below. Clicking in either column
header will sort the Options in ascending or descending alphabetical order.
Figure 27. NAVconfig Options page
Vehicle starts
Adjustment: select a predefined value from the drop-down list.
If you know the vehicle will be level when starting (to within about 5°) select Level. This
saves about 40 s during the initialisation process since the RT does not have to take the
time to compute an initial roll and an initial pitch. In high vibration environments Not
Level may not work and so the RT can only start if the vehicle is level and the Level
option has been specified.
Vibration
Adjustment: select a predefined value from the drop-down list.
To Next Page
Loading...
