Chapter 1 Setting Up Your Palm™ Tungsten™ E Handheld
2
Minimum requirements: Mac computers
The minimum requirements for Mac computers are as follows:
■ Mac computer or compatible with a PowerPC processor
■ Mac OS 9.1 or later with 12MB available memory or Mac OS X, version 10.1.2 to
10.2.6 (Mac OS X requires administrator rights to install Palm Desktop software)
■ 25MB available hard disk space
■ Monitor that supports screen resolution of 800 x 600 or better
■ CD-ROM or DVD-ROM drive for installing Palm Desktop software from the
included CD-ROM; or, you can download Palm Desktop software from
www.palm.com
■ Mouse
■ One available USB port
Upgrade information
If you already own a Palm OS
®
handheld, perform a HotSync
®
operation with
your old handheld and Palm Desktop software. Then follow the setup instructions
below.
Step 1: Charge your handheld
a. Connect the charging cable to a power source.
b. Connect your handheld to the cable for at least three hours for an initial charge.
c. After your handheld is charged, disconnect the handheld from the cable and
follow the steps below.
NOTE
To keep the battery fully charged, we recommend connecting your
handheld to a cable that is connected to a power source whenever you are not
using it.
To Next Page
Loading...
Need help?
General
