Palm Tungsten Tungsten E User Manual

HotSync problems
285
HotSync problems
My vCard or vCal e-mail
attachment isn’t forwarding
correctly [continued].
5. Click OK.
6. Start the e-mail client software and make sure it is
configured as the default MAPI client. Consult the
documentation for your desktop e-mail application for
more information.
The current date and time are
incorrect.
The current date and time are tied to the Location setting. If
you change the date and time without changing the Location
setting, the current date and time may appear incorrect.
See “Date & Time Preferences” in Chapter 16 for information
on setting the current location, date, and time.
Problem Solution
I cannot perform a HotSync
operation. What should I check
to make sure I’m doing it
correctly?
Make sure the mini-USB cable is connected securely.
On a Windows computer, try these steps:
1. Check the Windows system tray to make sure HotSync
Manager is running. If it is not, click Start on the Windows
taskbar, and then select Programs. Navigate to the Palm
Desktop software program group, and then select HotSync
Manager.
2. Make sure you selected Local USB from the HotSync
Manager menu.
On a Mac computer, try these steps:
1. Make sure HotSync Manager is enabled. If it is not,
double-click the HotSync Manager icon in the Palm folder
and enable HotSync Manager on the HotSync Controls tab.
2. If you are using a mini-USB cable, disconnect the cable from
your computer, and then reconnect the cable and restart
your computer.
I did a HotSync operation, but
one of my applications did not
synchronize.
■ On a Windows computer, click HotSync Manager, and then
select Custom. Check that the correct conduit is active.
■ On a Mac computer, double-click the HotSync Manager
icon. From the HotSync menu, select Conduit Settings.
Select your username from the User pop-up menu, and
check that the correct conduit is active.

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English