Chapter 14 Using World Clock
212
Viewing the time
There are several ways for you to easily check the current time and date.
To view the time:
Do one of the following:
■ When your handheld is on, tap the Clock icon in the upper-left corner of the
input area.
Your handheld displays the time for two seconds and then returns to the
previous application.
■ When your handheld is off, press Select on the navigator.
Your handheld turns on, displays the time, and then turns off after a few
seconds.
■ Tap the Home icon , and then tap the World Clock icon .
Setting the primary location
You can use World Clock to select the location, date, and time for the primary
location. Keep in mind that the primary location settings are also your system date
and time and that these settings are used by all the applications on your handheld.
The primary Location settings also appear in the Date & Time Preferences screen.
Similarly, if you change the settings in the Date & Time Preferences screen, those
settings become your system date and time and also appear under the primary
location in World Clock. The primary Location settings also serve as a point of
reference for the secondary locations.
To set the primary location:
1. Tap the primary location pick list.
2. Select the location you want to use as the primary location.
The location you select is typically a large city in the same time zone as the one
where you live. If an appropriate choice does not appear in the list, see “Adding
a location” later in this chapter to create a new location.
3. Tap OK.
Primary location
pick list
To Next Page
Loading...
Need help?
General
