Palm Tungsten Tungsten E User Manual

Chapter 14 Using World Clock
216
3. Tap the month when daylight saving begins.
4. Tap the Week pick list, and then select the week when daylight saving time
begins within the selected month.
5. Tap the Day pick list, and then select the day of the week when daylight saving
time begins within the selected week.
6. Tap OK.
7. Tap the End box, and then repeat steps 3 through 8 to select when daylight
saving ends.
8. Tap OK.
Modifying a location
If you add a location and later realize you did not use the correct settings, you can
modify the location.
To modify a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Select the location you want to modify.
4. Tap Edit.
5. Adjust the settings. See “Adding a location” earlier in this chapter for details.
6. Tap OK, and then tap Done.
Removing a location
If you no longer need a location that appears in the Location list, you can remove
it. However, you cannot remove a location that is currently assigned to the primary
location.
To remove a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Select the location you want to remove.
4. Tap Remov e .
5. Tap OK to confirm the deletion, and then tap Done.

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English