Palm Tungsten Tungsten E User Manual

Tapping and typing
11
To insert a card:
1. Insert the card into the expansion slot with the label side facing the display.
2. Push the card in with your thumb.
To remove a c a r d :
1. Push lightly against the card with your thumb.
2. Slide the card out of the expansion slot.
For complete information about working with expansion cards, see Chapter 6.
Tapping and typing
Like using a mouse to click elements on a computer screen, you can use the stylus
to tap elements on your handheld screen to get things done on your handheld.
The first time you start your handheld, the setup instructions appear on the screen.
These instructions include a calibration screen. Calibration aligns the internal circuitry
of your handheld with its touch-sensitive screen so that when you tap an element on
the screen, the handheld can detect exactly which task you want to perform.
IMPORTANT
Always use the point of the stylus for tapping or for making strokes on
the handheld screen. Never use an actual pen, pencil, or other sharp object to write
on the handheld screen, as this will scratch the screen.
Push
Push

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English