Palm Tungsten Tungsten E User Manual

Adding a location
215
Adding a location
If an appropriate location does not appear in a location pick list, you can add a new
location to the list. When you add a location, the default Time Zone and
Daylight Saving settings are usually correct. However, you can adjust these
settings if necessary. When the Daylight Saving options are active, the time change
automatically occurs at 1:00 AM on the selected start and end dates.
To add a location:
1. Tap a Location pick list.
2. Select Edit List.
3. Tap Add.
4. Select a location that is in the same time zone as the city you want to add.
5. Tap OK.
6. (Optional) Tap the Name field, and then modify the location name.
7. (Optional) Tap the Time Zone box, and then select a time zone.
8. Tap OK, and then tap Done.
To set Daylight Saving options:
1. From the Edit Location dialog box, tap the This location observes Daylight
Saving Time check box to select it.
2. Tap the Start box.

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English