Palm Tungsten Tungsten E User Manual

Resetting your handheld
275
Performing a soft reset
A soft reset tells your handheld to stop what it’s doing and start over again. All
records and entries stored on your handheld are retained with a soft reset. After a
soft reset, the Preferences screen appears and the Date and Time option is
highlighted so you can reset the date and time if needed.
To perform a soft reset:
■ Use the tip of an unfolded paper clip (or similar object without a sharp tip) to
gently press the reset button inside the hole on the back panel of your handheld.
Performing a hard reset
With a hard reset, all records and entries stored on your handheld are erased.
Never perform a hard reset unless a soft reset does not solve your problem.
NOTE
You can restore any data previously synchronized with your computer during
the next HotSync operation.
To perform a hard reset:
1. Press and hold the power button on the top panel of the handheld.
2. While holding the power button, use the tip of an unfolded paper clip (or
similar object without a sharp tip) to gently press and release the reset button.
Reset button

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English