Chapter 15 Performing HotSync
®
Operations
236
4. Select the profile you want to load on the handheld, and then click OK.
5. Click Yes to transfer all the profile data to the handheld.
The next time you perform a HotSync operation, Palm Desktop software prompts
you to assign a username to the handheld.
To use a profile for a first-time HotSync operation on a Mac computer:
1. Plug the HotSync cable into the port on the top of the new handheld.
2. Tap the HotSync icon
on the Home screen.
TIP
You can also tap the Star icon to perform a HotSync operation if you have
not changed the application associated with this icon. By default, tapping the
Star icon performs a HotSync operation.
3. Select the profile you want to load onto the handheld, and then click OK to
transfer all the profile data to the handheld.
The next time you perform a HotSync operation, Palm Desktop software prompts
you to assign a username to the handheld.
Shown with
Mac OS X
To Next Page
Loading...
