Palm Tungsten Tungsten E User Manual

Setting General Preferences
247
To set your handheld to lock at a preset time:
1. From the General Preferences list, select Security.
2. Tap the Auto Lock Handheld box, enter your password, and then tap OK.
3. Select At a preset time, and then use the arrows to set the time.
4. Tap OK, and then tap Done.
To set your handheld to lock after a period of inactivity:
1. From the General Preferences list, select Security.
2. Tap the Auto Lock Handheld box, enter your password, and then tap OK.
3. Select After a preset delay.
4. Enter the inactive period, and then select Minute(s) or Hour(s) from the pick list.
5. Tap OK, and then tap Done.
CAUTION
If you lock your handheld, you must enter the exact password to
reactivate your handheld. If you forget the password, your handheld will
present the hint you entered to help you remember the password. If you still
cannot remember the password, you must perform a hard reset to resume
using your handheld. Performing a hard reset deletes all the records on your
handheld; however, you can restore all synchronized data at the next HotSync
operation. See “Performing a hard reset” in Appendix A for more information.
Tap to select Minutes or Hours
Enter the amount of time

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English