Palm Tungsten Tungsten E User Manual

Setting Communication Preferences
259
Disabling Call Waiting
Call Waiting can cause your session to terminate if you receive a call while you are
connected. If your telephone has Call Waiting, you need to disable this feature
before logging in to your ISP or dial-in server.
To disable Call Waiting:
1. From the Communications Preferences list, select Network.
2. Tap the Phone box.
3. Tap the Disable call waiting check box to select it.
4. Enter the code to disable Call Waiting on the Disable call waiting line.
Each telephone company assigns a code to disable Call Waiting. Contact your
local telephone company for the code that is appropriate for you.
5. Tap OK, and then tap Done.
Using a calling card
The Use calling card field enables you to use your calling card when dialing your
ISP or intranet server. Keep in mind that there is usually a delay before you enter
your calling card number. When you define your calling card number, you need to
add commas at the beginning to compensate for this delay. Each comma delays
transmission of your calling card number for two seconds.
To use a calling card:
1. From the Communications Preferences list, select Network.
2. Tap the Phone box.
Enter your disable
code here
Select this
box if you
need to
disable Call
Waiting

Palm Tungsten Tungsten E Specifications

General

Brand	Palm
Model	Tungsten Tungsten E
Category	PDA
Language	English