7. Enter the password
*2
provided by the Dynamic DNS service provider (max. 63 characters).
8. Click [Save].
*1
[Space] and ["] cannot be entered.
*2
["] and [:] cannot be entered.
Canceling the camera’s access to the Dynamic DNS service
Use the following procedure to stop the camera from notifying the Dynamic DNS service when your global IP
address changes. Note that if you intend to stop using the Dynamic DNS service altogether, you may need to
contact the Dynamic DNS service provider in order to cancel your subscription.
1. Click the [Setup] tab.
2. On the left side of the screen under [Basic], click [DynamicDNS].
3. Select [Disable], then click [Save].
110 Operating Instructions
4.2.2 Configuring the Camera to Use a Third-party Dynamic DNS Service
To Next Page
Loading...
