Panasonic BL-C210 Series

Network (IPv4)
Parameter Default Value Range
Connection Mode Connection Mode BL-C210A/
BL-C230A:
DHCP
BL-C210CE/
BL-C210E/
BL-C230CE/
BL-C230E:
Automatic Setup
Automatic Setup,
Static, DHCP
Proxy Server Settings Address – –
Port No. 8080 1–65535
Login ID – –
Password – –
Network Configuration
from Setup Program
Network Configuration from
Setup Program (Available for
Static and DHCP connection
only)
Enable Enable, Disable
Internet Connection Port No. (Available for Static
and DHCP connection only)
80 1–65535
IP Address (Available for
Static connection only)
192.168.0.253 –
Subnet Mask (Available for
Static connection only)
255.255.255.0 –
Host Name (Available for
DHCP connection only)
– –
Default Gateway Default Gateway (Available
for Static and DHCP
connection only)
– –
DNS Primary Server Address
(Available for Static and
DHCP connection only)
– –
Secondary Server Address
(Available for Static and
DHCP connection only)
– –
Max. Bandwidth Usage Max. Bandwidth Usage
(Mbps)
Unlimited Unlimited, 0.1, 0.2, 0.3,
0.5, 1, 2, 3 Mbps
Connection Type Connection Type Auto Negotiation Auto Negotiation, 100
Mbps/Full Duplex, 100
Mbps/Half Duplex, 10
Mbps/Full Duplex, 10
Mbps/Half Duplex
212 Operating Instructions
13.7 Default Setting List