Network (IPv6)
Parameter Default Value Range
Connection Mode Connection Mode Automatic Setup Automatic Setup,Static
Internet Connection Port No. (Available for Static
connection only)
80 1–65535
IP Address (Available for
Static connection only)
– –
Default Gateway Default Gateway (Available
for Static connection only)
– –
DNS Primary Server Address – –
Secondary Server Address – –
Max. Bandwidth Usage Max. Bandwidth Usage
(Mbps)
Unlimited Unlimited, 0.1, 0.2, 0.3,
0.5, 1, 2, 3 Mbps
Connection Type Connection Type Auto Negotiation Auto Negotiation, 100
Mbps/Full Duplex, 100
Mbps/Half Duplex, 10
Mbps/Full Duplex, 10
Mbps/Half Duplex
HTTPS
Parameter
Default Value Range
HTTPS Use HTTP Use HTTPS, Use
HTTP
Certificate Information Camera IP Address or Host
Name
– –
Wireless (BL-C230 Only)
Parameter
Default Value Range
Wireless Configuration SSID NetCam**** –
Communication mode 802.11b/g 802.11b, 802.11b/g,
802.11g exclusive
Operating Instructions 213
13.7 Default Setting List
To Next Page
Loading...
