Panasonic BL-C210 Series - Page 219

Parameter Default Value Range
Video Display Time Not permitted Not permitted,
Unlimited, 10 s, 30 s, 1
min, 5 min, 10 min, 30
min, 60 min
Refresh Rate 3 s 3 s, 5 s, 10 s, 30 s, 60
s
Access Level All unchecked –
Guest User
Parameter
Default Value Range
Video Display Time Not permitted Not permitted,
Unlimited, 10 s, 30 s, 1
min, 5 min, 10 min, 30
min, 60 min
Refresh Rate 3 s 3 s, 5 s, 10 s, 30 s, 60
s
Access Level All unchecked –
Trigger
Parameter
Default Value Range
Trigger Setting Enable Image Buffer/Transfer Not enabled –
Trigger No. 1: Motion
Detection
No. 2–5: Timer
Timer, Sensor, Alarm1,
Alarm2, Motion
Detection, Sound
Detection
Alarm enable condition Rising: GND to Open
(High).
Rising: GND to Open
(High).
Falling: Open (High) to
GND.
Time Days All days checked –
Active Time of Trigger Always Always, specified time
Image Setting Format JPEG JPEG, MPEG-4
Image Resolution
320 ´ 240 640 ´ 480, 320 ´ 240,
192 ´ 144
Image Quality Standard Favor Clarity,
Standard, Favor
Motion
Operating Instructions 219
13.7 Default Setting List