Panasonic BL-C210 Series - Page 220

Parameter Default Value Range
Lens Position When
Triggered
When triggered, Do not move Do not move, Home
Position, Sensor,
Alarm No.1, Alarm No.
2, Presets 1–8
BL-C230 only:
External Output
Control Time None None, 1 s, 3 s, 5 s, 10
s, 30 s, 1 min, 3 min, 5
min, 10 min, 30 min,
When Recording
Image Buffer Frequency (for
timer triggers)
Image Buffer Frequency No. 1: Buffer 5 images
every 1 second
No. 2–5: Buffer 1
image every 1 second
1 image every hour–30
images every second
Image Buffer Frequency (for
sensor, alarm, and detection
triggers)
Enable Pre-trigger Image
Buffer
No. 1: Enabled
No. 2–5: Not enabled
–
Image Buffer Frequency No. 1: Buffer 5 images
every 1 second, total of
5 images
No. 2–5: Buffer 1
image every 1 second,
total of 1 image
1 image every minute–
30 images every
second. Total 1–600
images.
Enable Post-trigger Image
Buffer
Enabled –
Image Buffer Frequency No. 1: Buffer 5 images
every 1 second, total of
20 images
No. 2–5: Buffer 1
image every 1 second,
total of 1 image
1 image every minute–
30 images every
second. Total 1–1500
images.
Sensor deactivation time
setting
Sensor deactivation time None None, 10 s, 30 s, 1 min,
3 min, 5 min, 10 min
Transfer Method Transfer Method No. 1: No Transfer,
Memory Overwrite
No. 2–5: No Transfer,
No Memory Overwrite
No Transfer, No
Memory Overwrite
No Transfer, Memory
Overwrite
FTP
E-mail
HTTP
Send Notification When
Triggered
Send Notification When
Triggered
Disable Disable, Send E-mail
Notification, Send
HTTP Notification
220 Operating Instructions
13.7 Default Setting List