Panasonic BL-C210 Series

Operation Time
Parameter Default Value Range
Enable Not checked Enable, Disable
Days All days checked –
Operation Time Always Always, specified time
External Output (BL-C230 Only)
Parameter
Default Value Range
External Device Control Output Open Open, Short to GND
Button name modification Open
Short
–
Indicator Control
Parameter
Default Value Range
POWER Indicator Turn indicator on when
camera is on.
Turn indicator on when
camera is on.
Turn indicator on
during camera access.
Turn indicator on
during pyroelectric
sensor reaction.
Never turn indicator on.
BL-C210A/BL-C230A only:
AV LINK Indicator
Enable Enable, Disable
Privacy Mode
Parameter
Default Value Range
PRIVACY Button Enable Enable, Disable
Privacy Mode Disable Enable, Disable
Built-in Alarm
Parameter
Default Value Range
Trigger for Built-in Alarm Button only Button or sensor,
Button only, Sensor
only, Off
Built-in Alarm Volume Medium High, Medium, Low
Built-in Alarm Sound Type A A–D
226 Operating Instructions
13.7 Default Setting List