4-32 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Set System Speed Dial Index
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 5-80 for a Digital
Key Telephone, “System Speed Dial” on page 6-45 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 7-37 for a Single Line Telephone (SLT).
5. Press the HOLD key. 1 :HHMM
Time displays
6. Enter the hour (two characters) and minute (two characters).
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key. 2 :
Day of the Week displays
8. Enter the day of week where:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun.
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key to store the entry.
10. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
To Next Page
Loading...
