Panasonic DBS-576HD - Timed Reminder Call

7-40 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To change the Station Lockout security code:
Related Programming
• FF1-0-03: Extension COS (Station Lockout Enable/Disable)
• FF1-0-03: Extension COS (Station Lockout for another Extension Enable/Disable)
• FF1-2-02: Feature Codes (Station Lockout Code)
• FF1-2-02: Feature Codes (Station Lockout other Extensions Code)
• FF1-2-02: Feature Codes (Station Lockout Cancel other Extensions Code)
• FF1-2-02: Feature Codes (Walking TRS/Station Lockout Security Code Changing Code)
• FF1-0-19: TRS Class Under Station Lockout
• FF8-1-08; Walking TRS/Station Lockout Security Code
Considerations
• Walking TRS and Station Lockout use the same security code.
• You cannot override station lockout using Walking TRS feature.
• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.
• If station lockout is set, the phone is limited to the Station Lockout TRS Class outside calling
abilities. This TRS Class should be carefully selected to only allow the desired call types.
• Without Walking TRS/Station Lockout Security Code, you cannot set the Station Lockout
feature.
Timed Reminder Call
Description
Your telephone can act as an alarm clock with the Timed Reminder Call feature.
4. Dial the Walking TRS/Station Lockout security code.
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Dial the Walking TRS/Station Lockout Security Code
Change code (default = 749).
3. Dial the current Walking TRS/Station Lockout security
code.
4. Dial the new Walking TRS/Station Lockout security code.
5. Replace the handset.
Action Result