Panasonic DBS-576HD - Trunk Direct Pickup; Trunk Group Pickup

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-27
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
Operation
To use Trunk Group Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF5-3: MCO-Inbound Trunk Group
Considerations
•N/A
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
Operation
To use Trunk Direct Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Trunk Group Pickup code (default = 709). Extension number or outside phone num-
ber displays
3. Complete the call and replace the handset or press the ON/
OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Trunk Direct Pickup code (default = *0).
3. Dial the number of the ringing or holding (system) trunk. Outside number displays
4. Complete the call and replace the handset or press the ON/
OFF key.