Panasonic DBS-576HD - Exclusive Hold

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-21
To retrieve a call from Floating Hold:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold on HOLD Key
• FF1-0-02: Dial Control for Floating Hold Answer.
• FF1-2: Dial Plan
• FF4: FF-Key Feature Assignment
Considerations
• The number of floating hold orbits available may very depending on the Station Park/Floating
Hold Pickup setting (FF1-0-02-0025). The floating hold pickup access code can be set to *9
(default). The “*9” access code operates as follows:
Exclusive Hold
With Exclusive Hold, only the extension that held the call can retrieve it. Exclusive Hold can be used
to hold CO calls and extension calls.
Operation
To place a call on Exclusive Hold:
Action Result
1. (A) Press the FF key assigned to the Floating Hold orbit
number where the call is held.
OR...
(A) Enter the Floating Hold Pickup feature access code
(default = *9).
(B) Enter the Floating Hold orbit number 001-576 (CPC-
288/576), 001-099 or (CPC-288/576)
(See considerations below.)
CO XXX displays if line released (where
XXX = outside line number)
System Size Virtual Line Number and Operation
96,
01-09 Floating Hold pick up
10-96: For Station Park Hold pick up purpose
Above 96
001-099 Floating Hold pick up
100-576: Station Park Hold pick up purpose
Action Result
1. While on a call, press the CO key used for the call or press
the HOLD key.
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)