Panasonic DBS-576HD - Trunk Direct Pickup; Trunk Group Pickup

7-20 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
Operation
To use Trunk Group Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF5-3: MCO Inbound Trunk Group Members
Considerations
•N/A
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
Operation
To use Trunk Direct Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Trunk Group Pickup code (default = 709).
3. Complete the call and replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Trunk Direct Pickup code (default = *0).
3. Dial the number of the ringing or holding (system) trunk.
4. Complete the call and replace the handset.