Section 700 - Operation Chapter 4. User Maintenance
576-50-700 DBS 576 (USA) issued September 2001 4-11
Related Programming
•N/A
Considerations
•N/A
Set Exception Day Mode
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
3-27.)
You can specify exception days which allow for a range of days for the System to operate in the Night
mode. This is intended for extended holidays for business shut down periods that last for multiple
days. You can specify up to 6 exception day periods.
Operation
To set the Exception Day Modes:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 4-3.)
81-
User MAINT displays
2. At the 81 level, enter 07.
3. Press the HOLD key. 8107-
System Mode displays
4. Enter 2.
5. Press the HOLD key. 2-
Mode Except Day displays
6. Press the HOLD key. 200 :MMDD
PTN 1 Start Day displays
7. Enter the start date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key. 201 :MMDD
PTN 1 Stop Day displays
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key. Next Exception Day mode displays
To Next Page
Loading...
